KP5005A ionic wind curtain
Model: KP5005A
Application areas
-
Thin slices
-
Textile printing
Product Overview
KP5005A Ion wind curtain It is an electrostatic removal device developed and produced by Kapal Company to eliminate static electricity on the surface of an object.
KP5005A Ion wind curtain It is an electrostatic removal device used to eliminate dust absorbed by electrostatically. It is required to use compressed air and KP4003A high-voltage power supply. The length can be customized according to customer's requirements.
KP5005A Ion wind curtain A large amount of air flow with positive and negative charges can be generated, which can neutralize the charge carried on the object. When the surface of an object is negatively charged, it will attract positive charges in the air flow. When the surface of an object is positively charged, it will attract negative charges in the air flow, thereby neutralizing the static electricity on the surface of the object to achieve the purpose of eliminating static electricity.
KP5005A Ion wind curtain Widely used in thin sheet processing, slitting, rolling material, textile, printing and other industries.
Features
* Neutralizes static electricity quickly.
* The ionic gas flow covers a large area.
* The shell is sturdy, easy to install, and is made of aluminum.
* Safety sensing without electric shock.
* An adjuster can be added to adjust the air pressure arbitrarily.
* Ion wind curtain Good grounding protection.
Technical parameters
Operating voltage | AC 7.0KV |
Working distance | 100－300mm |
Operating temperature | 0℃-50℃ |
Working humidity | ＜70% |
Use media | Clean compressed air |
Ion equilibrium | ≤|±100V| (300mm away from the test center in front of the wind curtain) |
Discharge time | ≤2S (300mm away from the test center in front of the wind curtain) |
Air source connector | Ф8mm (customized according to customer requirements) |
Rod length | 100-3000MM (customized according to customer requirements) |
Cross-sectional area | 42mm(W)* 29mm(H)* X(Any length)mm |
Rod body material | Aluminum |
High voltage wire length | 3M |
Compressed air pressure | 0.3-0.8Mpa |
Test results
Test conditions | ||
Humidity: ≤60% Test voltage: 1KV-100V Ambient temperature: 22℃ | ||
distance | 300mm | |
Neutralization time | just | 1.1s |
burden | 1.2s | |
* The test results of the test instrument using ME268A electrostatic comprehensive tester shall prevail.
* Testing is based on IEC-61340-5-1 A·6.
* The data tested will vary depending on the temperature and humidity changes around it.